Need help?Do you have a question about the Rotel RA-921 and is the answer not in the manual?
Adjust VR601 on AF004111 PCB to read 4mV DC milli-voltmeter.
Adjust VR602 on AF004111 PCB to read 4mV DC milli-voltmeter.
General| Total Harmonic Distortion | 0.03% |
|---|---|
| Damping Factor | 100 |
| Input Sensitivity | 150mV (line) |
| Speaker Load Impedance | 4Ω - 8Ω |
| Input Impedance | 47kΩ |
| Power Output | 30W per channel (8Ω) |
| Frequency Response | 10Hz to 100kHz |
To Next Page
