Rotel RB-1090-3 - User Manual

Technical
Manual
STEREO POWER AMPLIFIER
RB-1090-3
Table of Contents
Specification
Specification.....................................1
Parts List..........................................2 ~ 6
Adjustment.......................................7 ~ 8
PCB Assembly.................................9
Schematic Diagram..........................10
Continuous Power Output 380 wats/ch into 8 ohms
(20-20kHz, < 0.03%) 700 wats/ch into 4 ohms
Total Harmonic Distortion(20-20kHz, 8 ohms) < 0.03 %
Intermodulation Distortion(60Hz : 7kHz, 4:1) < 0.03 %
Frequency Responce ( 1dB) 10 Hz - 100 KHz
Dampning Factor(20-20,000kHz, 8 ohms) 1000
Speaker Impedance(combined load) 4 ohms minimum
Signal to Noise Ratio(IHF A network) 125 dB
Input Impedance / Sensitivity 33 k ohms / 1.8 volt
Power Requirement 115 volts 60 Hz or
230 volts 50 Hz
Power Consumption 800 watts
Panel Height
432 x 237 x 406 mm
17
1/8 x 93/9 x 15 inches
Dimensions(W x H x D)
221 mm
Weight (net) 38 kg, 83.6 Lb.
BUNZAN-SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
®
Quality Uncompromised
Y-316D-0209/pdf
Begining 2311001

Summary

Technical Manual Specification

Appearance Overview

Parts List

Addendum List for Black and Silver

Adjustment Procedures

Memo Section

PCB Assembly Diagrams

Schematic Diagram

Rotel RB-1090-3 Specifications

General

Brand	Rotel
Model	RB-1090-3
Category	Amplifier
Language	English