To Next PageTo Next Page
Need help?Do you have a question about the Rotel RB-1080 and is the answer not in the manual?
Details the correction for speaker terminal polarity in the manual.
Guidelines for positioning the amplifier for optimal cooling and stability.
Explanation of THX Ultra certification standards and benefits.
Details on connecting the amplifier to the AC power source and outlet requirements.
How to operate the power switch and understand the power indicator light.
Explanation of automatic and manual power on/off modes using the trigger switch.
Information on connecting and using 12V trigger signals for automated control.
Description of the thermal protection circuit and its indicators.
How to select between unbalanced RCA and balanced XLR input signals.
Instructions for using standard unbalanced RCA audio connections.
Instructions for using low-noise balanced XLR audio connections.
Recommendations for selecting compatible loudspeakers and impedance.
Advice on choosing appropriate speaker wire for optimal performance.
Importance of correct polarity and phasing for speaker connections.
Steps to diagnose why the power indicator is not illuminated.
Procedure for checking and replacing the fuse.
Guidance for resolving issues where no audio output is produced.
What to do when the protection indicator light is active.
General| Damping factor | 1000 |
|---|---|
| Amplifier class | - |
| Frequency range | 15 - 100000 Hz |
| Input sensitivity | 1500 mV |
| Audio output channels | - channels |
| Peak power per channel | 200 W |
| Signal-to-Noise Ratio (SNR) | 116 dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| Power consumption (typical) | 550 W |
| Product color | Black, Silver |
Weight and Dimensions| Depth | 380 mm |
|---|---|
| Width | 433 mm |
| Height | 140 mm |
| Weight | 16700 g |
