To Next PageTo Next Page
Need help?Do you have a question about the Rotel RB-1070 and is the answer not in the manual?
Explains bridging the amplifier for increased power output and minimum impedance requirements.
Steps to diagnose and resolve issues where the power indicator is not illuminated.
Guidance on what to do if the internal fuse might have blown and requires replacement.
Procedures to follow if the amplifier has power but no audio output is produced.
How to interpret and address the protection indicator light, often related to overheating or faults.
Explains bridging the amplifier for increased power output and minimum impedance requirements.
Steps to diagnose and resolve issues where the power indicator is not illuminated.
Guidance on what to do if the internal fuse might have blown and requires replacement.
Procedures to follow if the amplifier has power but no audio output is produced.
How to interpret and address the protection indicator light, often related to overheating or faults.
General| Damping factor | 500 |
|---|---|
| Amplifier class | - |
| Frequency range | 4 - 100000 Hz |
| Input sensitivity | 1000 mV |
| Audio output channels | - channels |
| Peak power per channel | 130 W |
| Signal-to-Noise Ratio (SNR) | 120 dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| Power consumption (typical) | 400 W |
| Product color | Black, Silver |
Weight and Dimensions| Depth | 334 mm |
|---|---|
| Width | 433 mm |
| Height | 121 mm |
| Weight | 10200 g |
