To Next PageTo Next Page
Need help?Do you have a question about the Rotel RB-1572 and is the answer not in the manual?
General| Purpose | - |
|---|---|
| On/off switch | Yes |
| Product color | Silver |
| Connectivity technology | Wired |
| Damping factor | 400 |
| Amplifier class | D |
| Frequency range | 10 - 80000 Hz |
| Input sensitivity | 1250 mV |
| Audio output channels | 7.1 channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 109 dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| RMS power output per channel (4 Ohm) | 500 W |
| RMS power output per channel (8 Ohm) | 250 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 5 W |
| Power consumption (typical) | 280 W |
Weight and Dimensions| Depth | 339 mm |
|---|---|
| Width | 431 mm |
| Height | 99 mm |
| Weight | 7800 g |
Warnings about moisture, liquids, foreign objects, and electrical shock hazards. Essential for safe operation.
Specifies minimum 10 cm (4 inches) clearance for proper airflow and heat dissipation to prevent overheating.
Guidelines for safe power cord usage, plug types, routing, and outlet connection for user safety.
Identifies conditions requiring immediate shutdown and professional inspection or service for safe operation.
Identifies and illustrates front panel controls like Power Switch, Protection Indicator, and 12V Trigger.
Illustrates and labels rear panel connectors including AC Power Input, 12V Trigger, and Speaker Outputs.
Details using RCA inputs for connecting preamplifiers or sound processors with audio interconnect cables.
Explains the standard method of connecting speakers using one set of speaker wires.
Describes the process of connecting speakers using two sets of wires for improved audio performance.
Instruction to power off all system components before making or changing connections to prevent damage.
Advises turning the volume down before powering the amplifier on or off to protect speakers and hearing.
Details Rotel's 50-year history, commitment to quality, environmental consciousness, and manufacturing.
Explains Rotel's wattage ratings, comparing them to industry standards and the impact of speaker impedance.
Highlights key features: two channels, selectable power modes, protection indicators, and dual binding posts.
Recommends reading the manual, contacting dealers, saving packaging, and keeping sales receipts.
Discusses heat dissipation, required ventilation clearance, and ensuring adequate shelf support for the unit.
Details connecting the AC power cord and operating the front panel power switch for initial setup.
Explains the protection circuit, its LED indicator, and how it safeguards the amplifier from faults.
Describes the switch for selecting manual or 12V trigger automatic power on/off modes.
Explains the 3.5mm jacks for receiving and sending 12V trigger signals to control power.
Guidance on choosing speaker wire, ensuring correct polarity, and consistent connection for optimal sound.
Details connecting speaker wires using terminals, banana plugs, or lugs, including bi-wiring options.
Troubleshooting steps for no power, checking AC connections, power switch, and 12V trigger input.
Steps to diagnose no sound issues, checking protection indicator, connections, and component settings.
Explains why the protection indicator lights up and how to reset the amplifier after a fault condition.
Lists key technical specifications including power output, distortion, frequency response, and impedance.
Details power consumption, voltage requirements, physical dimensions, and weight of the amplifier.
