Tecnical
Manual
STEREO CONTROL AMPLIFIER
RC-1570
Table of Contents
Specification...................................... 1
Appearance ...................................... 2
Parts List .......................................... 3~5
PCB Assembly................................... 10~12
Schematic Diagram ........................... 13~15
2-11-4, NAKANE, MEGURO-KU,
TOKYO 152-0013, JAPAN
Serial. NO.
Beginning
®
Quality Uncompromised
RC-1570-TM-V101
THE ROTEL CO., LTD.
Specifications
Update Procedure.............................. 6~9
Total Harmonic Distortion (20Hz-20kHz) < 0.004%
Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.004% at 1V output
Input Sensitivity / Impedance
Phono Input (MM) 2.5 mV / 47k ohms
Line Level Inputs (RCA) 150 mV / 24k ohms
Line Level Inputs (XLR) 300 mV / 100k ohms
Input Overload
Phono Input 65 mV
Line Level Inputs 4.3 V
Output Level / Impedance
Output (RCA) 1V / 100 ohms
Output (XLR) 2V / 100 ohms
Frequency Response:
Phono Input 20 Hz-20k Hz, 0 μ0.3 dB
Line Level Inputs 4 Hz-100k Hz, 0 μ 0.3 dB
Tone Controls
Bass μ10 dB at 100Hz
Treble μ10 dB at 10kHz
Signal to Noise Ratio (IHF „A‰ weighted)
Phono Input 80 dB
Line Level Inputs 110 dB
Digital Section
Frequency Response 10Hz - 95k Hz (μ3.0dB, Max)
Signal to Noise Ratio (IHF „A‰ weighted) 100 dB
Input Sensitivity/Impedance 0 dBfs / 75 ohms
USB/iPod Digital Signals WAV, MP3, WMA (up to 48kHz 16 bit)
Coaxial/Optical Digital Signals SPDIF LPCM (up to 192kHz 24 bit)
PC-USB USB Audio Class 1 (up to 96kHz 24 bit)
USB Audio Class 2 (up to 192kHz 24bit)*
*Driver installation required
Power Requirements:
USA: 120 Volts, 60 Hz
EC: 230 Volts, 50 Hz
Power Consumption 15 watts
Standby Power Consumption < 0.5 watts
Dimensions (W x H x D) 431 x 99 x 320 mm
(17 x 4 x 12
5
/
8
ins)
Front Panel Height 2U ( 88.1mm, 3
1
/
2
ins)
Weight (net) 7kg, 16 lbs.
To Next Page
General
