Need help?Do you have a question about the Rotem AC-2000 SE and is the answer not in the manual?
General| Brand | Rotem |
|---|---|
| Model | AC-2000 SE |
| Category | Controller |
| Language | English |
General overview of the manual's purpose and content.
Explains symbols, warnings, and notations used throughout the manual.
Provides Rotem's contact details for support and inquiries.
Details revision history, document number, and copyright information.
Essential safety procedures for connecting equipment to earth ground.
Recommendations for installing EMI filters with power inverters.
Guidelines for inspecting and maintaining the controller's battery.
Critical steps for managing interference from frequency inverters.
Step-by-step instructions for physically installing the AC-2000 controller.
Details the specific wiring procedures for the AC-2000 Plus model.
Details the specific wiring procedures for the AC-2000 SE model.
Overview of various system configuration settings and options.
Defines ventilation levels, fan speeds, and timing parameters.
Assigns specific functions to each relay within the system.
Configures sensor assignments for temperature, humidity, and pressure.
Settings for automatic curtain opening and closing based on ventilation levels.
Steps to diagnose and resolve issues with the temperature sensor.
Steps to diagnose and resolve issues with the humidity sensor.
Steps to diagnose and resolve issues with the static pressure sensor.
Steps to diagnose and resolve issues with digital inputs or pulse signals.
Steps to diagnose and resolve communication problems.
Steps to diagnose and resolve issues with relay functionality.
Guidance on identifying and mitigating interference causing system resets.
Detailed information on the selection and installation of ground rods.
Specifications and requirements for the ground wire connection.
Guidance on choosing and using appropriate ground clamps.
Identifies all equipment that requires grounding for safety.
Methods and components for protecting the system from lightning strikes.
Wiring diagram and instructions for connecting a CO2 sensor.
Steps required to configure the CO2 sensor after installation.
To Next Page
