Need help?Do you have a question about the Rotenso IMOTO I21 Series and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Functions | Cooling, Heating |
| Energy Efficiency Class | A++ |
| Noise Level (Outdoor) | 50 dB |
| Air Flow (High) | 12 m³/min |
| Power Supply | 220-240V, 50Hz |
| Net Weight (Outdoor Unit) | 32 kg |
Properly dispose of the product and follow waste processing guidelines.
Details on safety measures for using refrigerants and their environmental impact.
Guidelines for safe installation procedures and precautions for technicians.
Important warnings and precautions for safe operation and handling of the appliance.
Identification and description of the indoor and outdoor unit parts.
Overview of unique functionalities like refrigerant leak detection and louver memory.
Specifies the temperature limits for cooling, heating, and drying modes.
Instructions on how to operate the unit using the manual control button during remote failure.
Guidance on adjusting vertical and horizontal louvers for optimal airflow.
Steps to take before starting any cleaning or maintenance on the appliance.
Procedures for cleaning the air conditioner's body and its filters.
Instructions on how to replace air purifying and air refreshing filters.
Measures for long-term inactivity and checks before seasonal use.
Common phenomena that occur during normal operation without indicating a fault.
Troubleshooting guide for common issues and their potential causes and solutions.
Overview of device specifications and a simple guide to start operation.
Instructions on inserting and replacing batteries in the remote control.
Explanation of each button on the remote control and its corresponding function.
Covers basic and advanced functions like sleep, ECO, turbo, and timer settings.
Details on wired controller power, ambient temperature, and humidity requirements.
Step-by-step guide for physically installing the wired controller.
Explanation of buttons on the wired controller and their functions.
Guides for operating the unit using the wired controller in various modes.
Instructions on setting timer functions for turning the unit on or off.
Information on refrigerants R290/R32 and general safety guidelines for handling.
Checks required before working with flammable refrigerants and area safety.
Guidelines for refrigerant removal, charging, and system commissioning.
Procedures for equipment labelling after decommissioning and refrigerant recovery.
To Next Page