What to do if operation indicator is flashing on Rotenso Air Conditioner?
If the operation indicator on your Rotenso Air Conditioner is flashing, it means the unit might shut down or continue running in safe mode. If this continues for more than 10 minutes, try disconnecting the power and reconnecting it. If the flashing persists, disconnect the air conditioner from the power and contact your nearest service center.
What to do if Rotenso UKURA causes frequent blown fuses?
If your Rotenso Air Conditioner is frequently blowing fuses or tripping the circuit breaker, turn off the air conditioner, unplug it, and then contact your nearest dealer for assistance.
Why is Rotenso UKURA Air Conditioner heating mode not providing enough heat?
If the heating mode on your Rotenso Air Conditioner isn't providing a comfortable temperature, it could be due to a drop in the outside air temperature, which reduces the amount of heat the unit can transport. It's recommended to use an additional heating device in such cases.
How to fix water condensation on Rotenso UKURA?
To address water condensation with your Rotenso Air Conditioner, set the horizontal louvers to their maximum opening angle and run the fan at high speed.
Safety advice, warnings, and guidelines for product disposal.
Specific safety rules and recommendations for installers.
Details on the R32 refrigerant and its safe handling.
Overview and identification of indoor and outdoor unit components.
Explains advanced features like self-cleaning and operating temperature limits.
Instructions for manual operation and adjusting airflow direction.
Details on SLEEP, AUTO modes, and tips for efficient operation.
Steps before servicing, cleaning the unit, and filter maintenance.
Procedures for preparing the unit for inactivity and seasonal checks.
Common operational phenomena that are not indicative of device failure.
Identifies common issues, their causes, and the necessary solutions.
Overview of remote specs, start-up guide, battery insertion, and usage tips.
Identifies remote buttons, screen symbols, and basic operating modes.
Details on advanced features like SLEEP, ECO, SWING, and timer settings.
Guidelines and diagrams for wiring and installing the wired remote control.
Identifies wired controller buttons, LCD features, basic functions, and troubleshooting.
Crucial safety data and general procedures for handling R290/R32 refrigerant.
Procedures for component repair, leak detection, refrigerant handling, and decommissioning.
General| Refrigerant | R32 |
|---|---|
| Cooling Technology | Inverter |
| Wi-Fi Control | Yes |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Class | A++ |
| Coefficient of Performance (COP) | 3.8 |
| Weight (Outdoor Unit) | 28 kg |
| Heating Capacity | 12000 BTU/h |
To Next Page