Rotenso TETA Series - User Manual

Questions and Answers

T
Tiffany GrayAug 19, 2025
Why is there insufficient air flow from my Rotenso Air Conditioner?
- K
  Kevin HaynesAug 19, 2025
  If your Rotenso Air Conditioner isn't providing sufficient airflow, whether hot or cold, there are several potential causes. First, make sure that the temperature is set correctly. Check for any obstructions blocking the air intakes and outlets, and remove them. Clean or replace the air filter if it's dirty. Ensure the fan speed isn't set to the minimum; increase it if necessary. Also, eliminate any additional heat sources in the room. Finally, check the refrigerant levels and refill if needed.
S
Stephanie MataAug 21, 2025
What to do if my Rotenso TETA does not respond to commands?
- T
  Timothy LambertAug 21, 2025
  If your Rotenso Air Conditioner isn't responding to commands, it might be due to several reasons. Ensure the remote control is close enough to the indoor unit. Try replacing the batteries in the remote control. Also, make sure there are no obstacles blocking the signal between the remote control and the signal receiver on the indoor unit.
A
Amanda BuckleyAug 23, 2025
How to fix a Rotenso Air Conditioner that does not operate?
- L
  Leslie PooleAug 23, 2025
  If your Rotenso Air Conditioner does not operate, check the power supply and ensure the plug is properly inserted. Inspect and replace the fan motor if it's damaged. Test and replace the thermomagnetic circuit breaker if necessary. Examine and replace any faulty protective devices or fuses. Secure any loose connections and ensure the plug is properly inserted. If the unit stops to protect itself, allow it to reset and check for issues before restarting. Ensure the voltage is within the specified range. Check if the TIMER-ON function is activated and adjust the settings accordingly. Inspect and replace the electronic control board if it's damaged.
M
Mary CrawfordAug 26, 2025
Why is the display off on my Rotenso Air Conditioner?
- N
  Nicole MiddletonAug 26, 2025
  If the display on your Rotenso Air Conditioner is off, it could be due to the DISPLAY function being active; check and adjust the settings. Alternatively, there may be a power failure; check the power supply.
A
Anne StricklandAug 28, 2025
Why does a fine mist come from the air outlet of my Rotenso Air Conditioner?
- W
  Warren ThomasAug 28, 2025
  A fine mist coming from the air outlet of your Rotenso Air Conditioner occurs when the air in the room becomes very cold, such as in "COOLING" or DEHUMIDIFYING/DRY modes.
C
chelseabrownAug 30, 2025
What causes the noise of running water in Rotenso TETA Air Conditioner?
- G
  Gregory DouglasAug 30, 2025
  To address the noise of running water in your Rotenso Air Conditioner, check the refrigerant circulation for issues related to the backflow of liquid in the refrigerant circulation.
P
paula12Sep 1, 2025
Why is my Rotenso TETA Air Conditioner airflow insufficient?
- J
  Julie WilliamsSep 1, 2025
  If your Rotenso Air Conditioner isn't providing sufficient airflow, whether hot or cold, first, make sure your temperature setting is appropriate. Check for any obstructions blocking the air intakes and outlets. A dirty air filter can also cause this issue, so clean or replace it. Ensure the fan speed isn't set to minimum and eliminate any other heat sources in the room. Finally, a lack of refrigerant could be the cause, so check for leaks and recharge if necessary.
D
Dominique WestSep 4, 2025
What to do if my Rotenso Air Conditioner does not respond to the remote control?
- K
  Kathryn CaseSep 4, 2025
  If your Rotenso Air Conditioner isn't responding to commands, try moving the remote control closer to the indoor unit. If that doesn't work, replace the batteries in the remote control. Also, make sure there are no obstacles blocking the signal between the remote control and the indoor unit.
S
Steven CohenSep 6, 2025
How to turn on the display of Rotenso TETA Air Conditioner?
- J
  James JoyceSep 6, 2025
  If the display on your Rotenso Air Conditioner is off, first check and disable the DISPLAY function. If that doesn't solve the issue, check the power supply and restore it if there's an outage.
S
Shelby SosaSep 8, 2025
Why does my Rotenso TETA make strange noises?
- K
  katiebrowningSep 9, 2025
  If your Rotenso Air Conditioner is making strange noises during operation, inspect and replace the electronic control board, fuses, or switches if needed. Remove any water or objects from inside the appliance. Examine and replace overheated cables or plugs. Investigate the source of any strong smells coming from the appliance and address it accordingly.

Summary

User Manual

Safety Precautions

Precautions

Introduction to Refrigerants R32

Information about the R32 refrigerant used in the unit.

Part 1. Indoor & Outdoor Units

Indoor Unit

Details of the indoor air conditioning unit.

Outdoor Unit

Details of the outdoor air conditioning unit.

Indoor Unit Display

Information shown on the indoor unit's display screen.

Emergency Button

Operation of the emergency button for control.

Operating Temperature

Part 3. Troubleshooting

Malfunctions

Common issues and their potential causes.

Error Code on the Display

List of error codes and their corresponding descriptions.

Part 4. Remote Control

Remote Controller Buttons

Identification and function of remote control buttons.

Remote Controller Display

Symbols and their meanings on the remote display.

Replacement of Batteries

Program Temperature Display

Part 5. Operating Instructions

Cooling Mode

How to operate the air conditioner in cooling mode.

Heating Mode

How to operate the air conditioner in heating mode.

Dry Mode

Fan Mode (not fan button)

Fan Speed Function (FAN button)

Auto Mode

Child-Lock Function

Timer Function - Timer ON

Timer Function - Timer OFF

Swing Function

Turbo Function

Mute Function

ECO Function

Rotenso TETA Series Specifications

General

Refrigerant	R32
Type	Split Air Conditioner
SCOP	Up to 4.0 (depending on model)
Features	Wi-Fi Control, Self-Cleaning, Turbo Mode, Sleep Mode
Power Supply	220-240V, 50Hz