3 x Operation
25
BA ROTEX HPSU compact 2 - 04/2011
Delete switching time
Delete individual switching times
Deleting one or more programmed switching times is carried out at the same time as saving the programmed switching times.
The following table explains the procedure.
For example:
– 4 switching times were programmed for Monday.
– After the 3
rd
switching time, the key is used to confirm completion of programming.
–The 4
th
switching time and 5
th
switching time (if available) are deleted.
Fig. 3-6 Delete individual switching times
To Next Page
Loading...
