Operation manual
5
RKRTWA
Room thermostat
4PW56104-1
3. Getting started
3.1. Setting the clock and date
After installation you first need to set the clock before you can
actually use the thermostat.
1 Activate the advanced mode by pressing
during 5
seconds in OFF mode (
&).
Refer also to "Description of the function modes and menus"
on page 7.
2 Navigate to the date and clock setting menu (
)) by pressing
and then press .
3 Set the hour, minutes, day of the week (
= Monday,
+ = Tuesday,...), day, month and year by pressing or
and confirm each time by pressing .
The value that you modify flashes.
3.2. Setting the desired mode: heating or cooling
1 Press
to go to comfort mode (#).
2 Press
during 5 seconds to go to the heating/cooling
selection mode.
3 Press
or to switch to the desired mode.
1 or 2 is flashing.
4 Press
to save your selection.
The thermostat returns to the schedule timer mode (
$).
NOTE
This is only possible if cooling mode is available.
To Next Page
Loading...