To Next PageTo Next PageWhat to do if Rotex Thermostat user-defined schedule does not react?
If your user-defined schedules are not reacting, it might be because the ????? code was modified after the schedules were programmed. To fix this, re-program the schedules as described in "Setting up a user-defined schedule" on page 12.
How to fix Rotex Thermostat with no readings on the LCD display?
If there are no readings on the LCD of your Rotex Thermostat, it's likely that the batteries are empty. Replace the batteries to resolve this issue. Refer to "Replacing batteries" on page 19.
What to do if buttons on Rotex Thermostat front cover do not react?
If the buttons on the front cover of your Rotex Thermostat are not responding, press the ? and ? buttons simultaneously to deactivate it.
Why are clock and date flashing on Rotex Thermostat LCD?
If the clock and date are flashing on your Rotex Thermostat's LCD, set the clock and date as described in “Setting the clock and date” on page 5.
General| Accuracy | ±0.5°C |
|---|---|
| Display | LCD |
| Weight | 150g |
| Mounting | Wall Mount |
| Power Source | Battery |
| Installation | Indoor |
Initial setup procedure for the thermostat's internal time and date.
Guide to choosing between heating or cooling operation.
Instructions for adjusting the target room temperature.
Steps for selecting and enabling a programmed daily schedule.
Guide to programming custom daily temperature schedules.
