Rotex RKRTWA - Manual Schedule Override

Operation manual
11
RKRTWA
Room thermostat
4PW56104-1
5.3. Manually overriding a schedule
There are 2 ways of overriding a schedule:
■ A temporary override in locked schedule timer mode (
55
55
)
Temporarily choose the comfort or reduced setpoint by
pressing 1 button only:
 or . The cursor “;” will
move.
• comfort setpoint:
Sand Jare displayed.
• reduced setpoint:
Yand Jare displayed.
■ A temporary override of the setpoint in schedule timer
mode
Press
 or  to modify the setpoint in steps of
0.5°C/0.5°F. Save a new, manual setpoint by pressing
 or
by waiting 5 seconds.
Jis displayed.
Locking and unlocking the schedule timer mode is performed by
pressing
. The locked schedule timer mode displays as 5.
The unlocked schedule timer mode displays as
$.
NOTE
By default the manual override is active until the next
scheduled action. You can change this behavior by
means of user code
: the manual override will
then only be active for 1 hour. Refer to "Setting up
codes in the user menu" on page 15.