Need help?Do you have a question about the Rotex RRLQ006CAV3 and is the answer not in the manual?
Explains the purpose and content of the documentation set.
General safety guidelines and precautions for installers.
Requirements for selecting a safe and suitable installation location.
Safety precautions and guidelines for handling refrigerant.
Safety precautions and guidelines for handling brine.
Safety precautions and guidelines regarding water quality.
Critical safety precautions for electrical work and connections.
Details the target audience and documentation set for the product.
Provides an overview of the chapters and their content in the installer guide.
Information on unpacking and handling the delivered units.
Instructions for unpacking and removing accessories from the outdoor unit.
Instructions for unpacking and removing accessories from the indoor unit.
Information on identifying units and available options.
How to identify outdoor and indoor units using their labels.
Details possible combinations of units and optional equipment.
Provides an overview of the application possibilities of the heat pump system.
Guidelines for configuring the system for space heating and cooling.
Instructions for integrating and setting up an auxiliary boiler.
Guidelines for setting up and configuring the domestic hot water tank.
How to read and configure energy metering data.
Instructions for setting up power limitation for the system.
Information on connecting and configuring an external temperature sensor.
Describes tasks and knowledge required before going on-site.
Details requirements for preparing the installation site for the units.
Requirements and guidelines for preparing refrigerant piping.
Requirements and guidelines for preparing water piping.
Guidelines and precautions for preparing electrical wiring.
Describes the on-site installation workflow and stages.
Procedures for opening the indoor and outdoor units for access.
Detailed steps and precautions for mounting the outdoor unit.
Detailed steps and precautions for mounting the indoor unit.
Instructions for connecting the refrigerant piping between units.
Procedures for checking refrigerant piping for leaks and vacuum.
Guidelines and precautions for charging refrigerant into the system.
Instructions for connecting the water piping to the indoor unit.
Detailed steps for connecting electrical wiring to the units.
Describes the importance and methods of system configuration.
Guides through essential initial system settings using quick wizards.
Configuring settings for space heating and cooling operations.
Settings for domestic hot water preparation and tank control.
Settings for optimizing system performance and advanced features.
Configuration options for backup heater and heat pump operations.
Configuration of system priorities and operating parameters.
Describes the steps for commissioning the system after installation.
Important safety precautions to follow before commissioning.
A comprehensive checklist to ensure readiness before commissioning.
A checklist of tasks to perform during the commissioning process.
Procedure for removing air from the water circuit.
Instructions for performing system and actuator test runs.
Procedure for drying out underfloor heating screed.
Guidance on how to hand over the system and its operation to the end user.
Information regarding the yearly maintenance of the units.
Essential safety precautions before performing maintenance.
Tasks to perform for the annual maintenance of the outdoor unit.
Tasks to perform for the annual maintenance of the indoor unit.
Introduction to troubleshooting based on symptoms and error codes.
Important safety precautions to follow during troubleshooting.
Guides to diagnose and solve problems based on observed symptoms.
Provides an overview of error codes and their descriptions.
Information on the proper disposal of the system and its parts.
Procedure for safely pumping down refrigerant before disposal or relocation.
Instructions for starting and stopping the forced cooling operation.
Schematic diagram of the outdoor unit's piping connections.
Schematic diagram of the indoor unit's piping connections.
Diagram illustrating outdoor unit electrical connections.
Diagram illustrating indoor unit electrical connections.
External Static Pressure curves for the indoor unit.
Explains the purpose and content of the documentation set.
General safety guidelines and precautions for installers.
Requirements for selecting a safe and suitable installation location.
Safety precautions and guidelines for handling refrigerant.
Safety precautions and guidelines for handling brine.
Safety precautions and guidelines regarding water quality.
Critical safety precautions for electrical work and connections.
Details the target audience and documentation set for the product.
Provides an overview of the chapters and their content in the installer guide.
Information on unpacking and handling the delivered units.
Instructions for unpacking and removing accessories from the outdoor unit.
Instructions for unpacking and removing accessories from the indoor unit.
Information on identifying units and available options.
How to identify outdoor and indoor units using their labels.
Details possible combinations of units and optional equipment.
Provides an overview of the application possibilities of the heat pump system.
Guidelines for configuring the system for space heating and cooling.
Instructions for integrating and setting up an auxiliary boiler.
Guidelines for setting up and configuring the domestic hot water tank.
How to read and configure energy metering data.
Instructions for setting up power limitation for the system.
Information on connecting and configuring an external temperature sensor.
Describes tasks and knowledge required before going on-site.
Details requirements for preparing the installation site for the units.
Requirements and guidelines for preparing refrigerant piping.
Requirements and guidelines for preparing water piping.
Guidelines and precautions for preparing electrical wiring.
Describes the on-site installation workflow and stages.
Procedures for opening the indoor and outdoor units for access.
Detailed steps and precautions for mounting the outdoor unit.
Detailed steps and precautions for mounting the indoor unit.
Instructions for connecting the refrigerant piping between units.
Procedures for checking refrigerant piping for leaks and vacuum.
Guidelines and precautions for charging refrigerant into the system.
Instructions for connecting the water piping to the indoor unit.
Detailed steps for connecting electrical wiring to the units.
Describes the importance and methods of system configuration.
Guides through essential initial system settings using quick wizards.
Configuring settings for space heating and cooling operations.
Settings for domestic hot water preparation and tank control.
Settings for optimizing system performance and advanced features.
Configuration options for backup heater and heat pump operations.
Configuration of system priorities and operating parameters.
Describes the steps for commissioning the system after installation.
Important safety precautions to follow before commissioning.
A comprehensive checklist to ensure readiness before commissioning.
A checklist of tasks to perform during the commissioning process.
Procedure for removing air from the water circuit.
Instructions for performing system and actuator test runs.
Procedure for drying out underfloor heating screed.
Guidance on how to hand over the system and its operation to the end user.
Information regarding the yearly maintenance of the units.
Essential safety precautions before performing maintenance.
Tasks to perform for the annual maintenance of the outdoor unit.
Tasks to perform for the annual maintenance of the indoor unit.
Introduction to troubleshooting based on symptoms and error codes.
Important safety precautions to follow during troubleshooting.
Guides to diagnose and solve problems based on observed symptoms.
Provides an overview of error codes and their descriptions.
Information on the proper disposal of the system and its parts.
Procedure for safely pumping down refrigerant before disposal or relocation.
Instructions for starting and stopping the forced cooling operation.
Schematic diagram of the outdoor unit's piping connections.
Schematic diagram of the indoor unit's piping connections.
Diagram illustrating outdoor unit electrical connections.
Diagram illustrating indoor unit electrical connections.
External Static Pressure curves for the indoor unit.
General| Cooling Capacity | 6.0 kW |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Air Flow (High) | 950 m³/h |
| Refrigerant | R32 |
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Power Consumption (Heating) | 1.71 kW |
| Operating Temperature (Cooling) | -10 to 46 °C |
| Operating Temperature (Heating) | -15 to 24 °C |
| Features | Sleep Mode |
| Warranty | 5 years compressor, 2 years parts |
To Next Page
