ROTOmotor Ltd., Czech Republic - Europe
ROTO 85 FS
ROTOmotor Ltd., Czech Republic - Europe
Operating instructions
ROTOmotor manufacturer of top four-stroke engines
Page:7
NO TOOLS ONLY HAND
LOCTITE 326
WAIT
3HOURS
We recommend leading the waste oil hose to the landing gear.
Waste output is very important and must never be blocked.
In any case do not reduce the diameter of the hose, or it will damage the engine.
If the waste output was clogged, the motor will be damaged.
4.5 Waste output
Then install the lubrication waste oil hose on the rear cover of the engine. To seal it we use
Loctite 326 glue or similar to seal the thread.
To Next Page
Loading...
