RotopaX Storage Pack User Manual

Pack Mount Instructions:
STEP 1 – Mounting upright base to desired surface
If mounting to a surface with an accessible backside (such as a thin walled container):
Option 1 – Discard the Round Mounting Disk and mount the Upright Base directly to the surface using the 2 hex
bolts provided.
OR, Attach the Round Mounting Disk to the Upright Base using the 2 hex bolts provided, then use 4
carriage bolts, nuts, and washers provided to attach the Round Mounting Disk to the surface.
Option 2 – If you are worried that the Pax Mount might bend your mounting surface, use the Backing Plate
(sold separately) in conjunction with the Round Mounting Disk and Upright Base to support the
backside of the surface as shown.
If mounting to a surface where backside is not accessible (such as a stud on a garage wall):
Option 3 – Discard the Round Mounting Disk and mount the
Upright Base directly to the surface with two long
screws (not included) through the two outer holes in
the Upright Base.
OR, Attach the Round Mounting Disk to the Upright
Base using the 2 hex bolts provided, then use two
shorter screws (not included) to attach the Round
Mounting Disk and Upright Base to the surface
through the two additional holes in the Round
Mounting Disk.
STEP 2 – Mounting Fuel Pack onto Upright Base
Once upright base has been mounted to the surface:
Mount Fuel Pack onto base and insert the T-Handle into threads in the top of the Upright Base then
tighten by twisting clockwise to desired tension.

RotopaX Storage Pack Specifications

General

Brand	RotopaX
Model	Storage Pack
Category	Motorcycle Accessories
Language	English

Summary

Mounting Upright Base to Surface

Mounting to Surface with Accessible Backside

Instructions for mounting the upright base to surfaces with an accessible backside.

Mounting to Surface with Inaccessible Backside

Instructions for mounting the upright base to surfaces with no accessible backside.

Mounting Fuel Pack onto Upright Base

Connecting Fuel Pack and T-Handle

Mount Fuel Pack onto base and insert T-Handle into the Upright Base.

DLX T-Handle Operation

Inserting DLX T-Handle

Insert DLX T-Handle into Upright Base and tighten to desired tension.

LOX T-Handle Operation and Security

Inserting and Aligning LOX T-Handle

Insert LOX T-Handle, tighten to desired tension, and align with Fuel Pack.

Locking LOX T-Handle

Insert lock into handle hole to secure it.

Pack Mount Extension Installation

Mounting Fuel Pack to Extension Handle

Insert Extension Handle into Upright Base and align indents.

Mounting Second Fuel Pack

Mount another Fuel Pack onto the extension handle.

Universal Mounting Plate Installation

Attaching Upright Bases to Plate

Attach Upright Bases loosely to Universal Mounting Plate, then mount Fuel Pack(s).

Attaching Plate to Surface

Attach the Universal Mounting Plate to a desired surface.

Pack Mount L-Bracket Installation

Attaching L-Bracket to Surface

Attach the L-Bracket to a desired surface using hardware.

Attaching Upright Base to L-Bracket

Attach the Upright Base to the L-Bracket using hardware.

RZR Mounting Plate Installation

Mounting Plate to Bar

Wrap RZR Mounting Plate around bar and use hose clamp to stabilize.

Attaching Upright Base to RZR Plate

Attach Upright Base to the RZR Mounting Plate using hardware.