Need help?Do you have a question about the ROTOR ALDHU ROAD and is the answer not in the manual?
Specifies compatible frame types for ALDHU / VEGAST cranksets.
Guidance for preparing BB, rings, and pedals, referencing manufacturer manuals.
Instructions for inserting axle into Direct Mount and adjusting OCP position.
Steps for positioning and tightening the drive-side crank arm onto the axle.
Procedure for preparing the non-drive-side assembly and preload nut.
Guide for installing crankset assemblies with appropriate spacers into the frame.
Procedure for tightening crank bolts and fine-tuning preload to eliminate play.
Specifies compatible frame types for ALDHU / VEGAST cranksets.
Guidance for preparing BB, rings, and pedals, referencing manufacturer manuals.
Instructions for inserting axle into Direct Mount and adjusting OCP position.
Steps for positioning and tightening the drive-side crank arm onto the axle.
Procedure for preparing the non-drive-side assembly and preload nut.
Guide for installing crankset assemblies with appropriate spacers into the frame.
Procedure for tightening crank bolts and fine-tuning preload to eliminate play.
General| Crank Arm Length | 165mm, 170mm, 172.5mm, 175mm |
|---|---|
| Material | Aluminum |
| Discipline | Road |
| Axle Type | 30mm |
| Chainring Options | Direct Mount |
| Type | Crankset |
| BCD | 110mm |
| Chainring Sizes | 50/34T |
| Spider Type | Direct Mount |
| Finish | Black |
To Next Page
