ROUSH F-150 2021 - EXHAUST; Disassembly of the Ford Exhaust

2021 ROUSH Performance F-150 Service Manual
5
2021 ROUSH Performance F-150 Service Manual
EXHAUST
Disassembly of the Ford Exhaust
The following section will guide you through the disassembly and removal of the stock components.
1. Remove the two (2) bolts that secure the intermediate pipe and resonator to the catalyst pipe. Set these
fasteners aside as they will be re-used.
2. Loosen the clamps that secure the intermediate pipe and resonator to the muer and tail pipes.
3. Remove the hanger in the center of the vehicle at the rear of the muer. This will aid in removing and installing
the exhaust components.
4. Remove the intermediate pipe and resonator from the vehicle.
5. Slide each of the hangers out of the rubber hangers and remove the factory muer/tail pipe assembly from
the vehicle.
6. Cut front ange off catalyst ange here. Retain for later use.