57
___________________________________
Press the “HOME” key.
Touch “SAVE DATALOGGER” and set the
parameters required. Touch “START SAVE”
to create a new log file.
Touch “RECALL” to recall the Logger
or “EXIT” to exit.
Touch “SPECIAL FUNCT”
and then “SAVE DATALOGGER”.
DATA LOGGER run.
Example of saved measured in the Log file.
Touch the screen to browse through
measurements saved in the log file.
NOTE: if the MANU plan has mixed TV and SAT programs, the “STOP&GO” function will assist
when running a LOGGER asking to move the cable lead from a TV to a SAT signal source.
To Next Page
Loading...
