67
OPTIONAL “APPS”
_____________________________________________
The SW REMOTE CONTROL application allow to configure and memorized the instruments
and all measurements remotely via web browser (PC, TABLET and SMARTPHONE)
Touch “CONFIGURATION MENU”
from “VOLUME” screen.
Touch “IP CONFIG” and select “DHCP”.
IP address assignment to be inserted into
the web browser done.
Touch “METER” and then
“LAN CONFIGURATION”.
Touch “CHECK”.
At the end touch “EXIT” to exit.
The REMOTE CONTROL is available only in the PLUS version, because it is equipped with LAN.
To Next Page
Loading...
