AMENDMENT INSTRUCTION SHEET
MINI ELECTRICAL CIRCUIT DIAGRAMS
Publication Number RCL0194ENG
Amendment Number: XN002.98ENG Date: 09/98
To ensure that this manual is kept up to date and that a record of amendments to this manual is available, an
Amendment Instruction Sheet will be issued with each set of revised pages.
• The Title page of the Manual is re-issued, and the Part No. has been raised to the next edition. Except for the
Contents pages, all revised and new pages have the issue date at the foot of each page, together with an
indication of whether the pages are revised or new.
• This Amendment Instruction Sheet must be inserted at the front of the manual to indicate that the amendment
has been incorporated. Do not discard previous Amendment Instruction sheets.
• Your manual is only complete to this issue providing all prior Amendments are included.
• The filing instructions give section and page numbers affected. Additional pages or complete new sections may
be issued, insert the pages as instructed.
FILING INSTRUCTIONS
Section Discard Existing
Pages
Insert New Pages Reason for Amendment
CONTENTS PAGE Contents page Contents page Part number raised to 2nd Edition and year
of copyright amended.
POWER
DISTRIBUTION
Page 1.1 Page 1.1 Model year qualifier on Catalyst overheat
details
ANTI-THEFT ALARM
AND HORN
Page 3.1 Page 3.1 Circuit details amended to include 1998 MY
changes
CATALYST
OVERHEAT
Page 37.2 Page 37.2 Model year qualifier on Catalyst overheat
details
INDICATORS AND
HAZARDS
Page 44.1 Page 44.1 Circuit details amended to include 1998 MY
changes
To Next Page
Loading...
