Wipers & washers
63
WINDSCREEN WIPERS
The windscreen wipers will only operate when
the starter switch is turned to position ’I’ or
’II’.
WARNING
To prevent possible overload damage to the
linkage or the wiper motors, in either
freezing or extremely hot conditions, care
must be taken to ensure that the wiper
blades are not adhering to the glass before
operating the wipers.
FRONT SCREEN
To operate the front screen wipers only, the
lever must be pushed away from the steering
wheel.
Single wipe
Raise the lever to position ’1’ and release.
Intermittent wipe
Lower the lever to position ’2’ to engage
intermittent wipe. Rotate the thumb wheel left
or right, to reduce or increase the delay
between wipes.
Normal/fast speed wipe
Lower the lever to position ’3’ for normal, and
to position ’4’ for fast, continuous wipe speed.
To Next Page
Loading...
