Rover Scottbonnar - Installing the Mulch Plug

Installing the grass catcher– refer figures 3 and 4.
 Raise the rear flap of the mower.
 Grasp the grass catcher by the top handle and position the grass catcher against
the rear of the mower. Refer to Figure 3.
 Lower the rear flap so that the back edge of the rear flap hooks over the matching
lip on the grass catcher. Refer to Figure 4.
Figure 3. Grass catcher fitment Figure 4. Grass catcher fitted
Removing the grass catcher
 Raise the rear flap of the mower to release the grass
catcher.
 Lift the grass catcher clear of the mower and lower the
rear flap.
Emptying the grass catcher - refer figure 5.
 Remove the grass catcher (as per the instructions
above).
 Tilt the grass catcher with the opening downwards.
 Grip the catcher handle of the grass catcher and shake
the clippings out. Refer to figure 5.
Figure 5.
Emptying grass
catcher
OPERATION - Mulch Mowers (only)
Installing the Mulch Plug
4