8
• Clean the coffee-maker with a soft,
damp cloth.
• Clean the inside of the jug only with
a soft brush and rinse with fresh
water.
• The internal filter holder is
detachable
(illustrations 10a and 10b).
• Do not immerse the coffee-maker in
water.
• The filter holder (b) is dishwasher
safe but the thermal coffee jug (f)
and the swing filter case are not (d).
• Disconnect the coffee-maker and
leave it to cool.
Caution!
Do not put hard objects, like
metallic or ceramic tea
infusers, in the jug as they
could damage the inside.
Follow the illustrations 9 to 12
Tip for cleaning the jug:
Put a litre of water in the jug.
Add some dishwasher
detergent (powder or pellets)
and allow it to act for at least
2 hours. Empty and rinse
thoroughly.
Clean the jug lid regularly (fig.
13a) and then rinse with fresh
water (fig. 13b).
CLEANING AND MAINTENANCE
- Stop the appliance once half the
solution has run through and leave
for about an hour. Start the coffee-
maker again and let the rest of the
solution run through.
- After descaling, the appliance must
be operated at least 2 or 3 times
with fresh water to rinse.
The guarantee does not cover
coffee-makers with excessive scale
build-up.
•
Descale your coffee maker after
every 40 cycles.
You can use:
• a packet of limescale remover
diluted in 2 large cups of water.
• or 2 cups of white vinegar.
- Pour the cold descaling solution into
the tank, fit a paper filter in the filter-
holder and place the jug with its lid
fitted in the coffee-maker.
- Start the coffee-maker.
DESCALING