EasyManua.ls Logo

Rowenta ultrasteam - Special Instructions; Dual Voltage Operation

Rowenta ultrasteam
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAVE THESE INSTRUCTIONS
Use care when you empty a steam appliance, there may be hot water
in the reservoir.
The use of accessory attachments other than those provided by
Rowenta is not recommended and may result in fire, electric shock or
personal injury.
This is an 800 Watt appliance.
To avoid a circuit overload, do not operate a high wattage appliance on
the same circuit.
If an extension cord is absolutely necessary, a 15 amp cord should be
used. Cords rated for less amps may overheat. Care should be taken to
arrange the cord so that it cannot be pulled or tripped over.
For dual voltage* appliance:
a. Be sure dual voltage selector is in correct voltage position before
operating.
b. Before plugging in, read the information about dual voltage
operation contained in the instruction section of this manual.
c. This appliance was set at the factory to operate at 120 Volts.
Refer to operating instructions section of this manual for conversion
to 230 Volt operation.
d. Incorrect setting of voltage can result in damage to the appliance.
Your Rowenta appliance is intended for household use only.
SPECIAL INSTRUCTIONS
* Depending on model
1103902239 - ultrasteam usa-2l - corrigé 3-10-2007 5/10/07 15:47 Page 4

Other manuals for Rowenta ultrasteam

Related product manuals