Steaming clothes
The steambrush is equipped with a fabric brush.
• To attach the accessory, line it up with the steam
head until it locks into position with an audible
click.
• Simply pull on the top of the fabric brush to
remove it. You can operate the unit with or
without the accessory.
• Hang the wrinkled article of clothing on a clothes hanger.
• Pull the clothing taught with one hand.
It is normal for a small amount of smoke or steam to be produced the
first time the appliance is used. This will quickly disappear.
Before removing or attaching the fabric brush, unplug your appliance
and let it cool down.
Tips: Check the fabric’s label for recommendations. We
recommend that you test acrylic, nylon or other synthetic fabrics
in an inconspicuous area to ensure these fabrics are not damaged
by hot steam. Test fabric for color fastness in an unobtrusive part
of the garment (inner seam). Do not touch silk or velvet with
steam head. Some articles can be steamed better from inside.
Heavier fabrics may require repeated steaming. Exercise caution
at all times. For very delicate fabrics, you can remove the brush.
To avoid damage to clothes, keep a distance of 1.5 inches between
the steam head and the fabrics. We recommend that before the
first use or after the appliance has been stored for some time to
test the burst of steam.
To Next Page
Loading...
Need help?
General
