EasyManua.ls Logo

ROXEL VRP-120 - Page 6

ROXEL VRP-120
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
18
resume playback, press the Play/Pause button again.
NOTE: In Wireless Audio mode, if no audio signal is received for 15 minutes, it will
automatically enter Standby mode. In this mode the red light flashes slowly, press the
POWER knob to exit Standby mode.
NOTE:
In Wireless Audio mode, if no audio input for 15mins, it will enter into standby automatically.
In standby, the red light flashes slowly, press any key to wake up the machine.
USB PLAYBACK FUNCTION
Make sure the turntable arm is on the stand.
Select the USB source with the appropriate knob and turn on the product.
Insert a USB stick (containing songs in MP3 format) into the appropriate input, playback will
start automatically.
Press the PLAY / PAUSE button to pause / resume playback.
Press the NEXT TRACK / PREVIOUS TRACK buttons to go to the next song / return to the
previous song or hold them down for a long time to fast forward / fast rewind through the
song being played.
Note:
Compatibility with all commercially available USB storage devices cannot be guaranteed.
External devices that require a rated voltage greater than 5V and a rated current greater
than 200mA are not supported.
If you use a USB extension cable, the connected storage device may not be recognized or
work properly.
Only use USB storage devices formatted with the FAT16/FAT32 file system.
NOTE: In USB mode, if no audio signal is received for 15 minutes, it will automatically enter
Standby mode. In this mode the red light flashes slowly, press the POWER knob to exit Standby
mode.
RECORDING VINYL/WIRELESS AUDIO ON USB
Insert a USB stick into the appropriate slot and start playback from the source you want to
record (Turntable / Wireless Audio).
Long press the REC button to start recording, a sound will confirm the start of recording.
To stop recording, long press the REC button again, a double sound will confirm the end of
recording.
The recordings are saved in the “RECORD” folder of the inserted USB stick.
To play saved recordings, select the USB source and long press the MODE button.
Deleting recordings from USB
Start playback of the recording to be deleted then press and hold the DEL button, an acoustic
signal will confirm the deletion.