Roxio Creator 2011 - Erasing Discs; Saving Projects as Disc Image Files and Disc Volumes

Roxio Creator User Guide
www.roxio.com
104
6 Click Burn to begin burning the project.
The Burn Progress dialog box opens, showing you the progress while
the project is burning to disc.
7 When the burn is complete, click OK to close the Burn Progress dialog
box.
Erasing discs
To erase a disc:
1 Insert the disc that you want to erase.
2 Choose Tools > Erase disc.
The Erase Disc dialog box opens.
3 Select the drive that contains the disc from the Drive list.
4 Click Erase Disc.
Saving projects as disc image files and disc volumes
Instead of burning your project to disc, you can save the entire contents of
the project into a single file called a disc image. This file contains all of the
information needed to burn the project to a disc directly from your hard
disk.
You can also save the project as a disc volume on your hard disk. A disc
volume is a folder containing all the files that get burned onto a disc.
You might want to save your project as a disc image or disc volume for the
following reasons:
■
To make multiple copies of the project.
■
To allow someone else to burn your project to a disc for you, while
preventing them from making changes to the project.
■
To postpone burning a completed project.
Note To burn a disc image or disc volume to disc, use the
optional Creator Classic component, or other disc burning
software.
C13_UserGuide.book Page 104 Wednesday, June 9, 2010 4:11 PM