Roxio Creator 2011 - Printing Photos and Projects

Roxio Creator User Guide
www.roxio.com
208
Printing photos and projects
To print your photos and projects:
1 Open the Print dialog box using one of these methods:
■
From Roxio Home, select the Photo project tab and choose Print.
■
On the PhotoSuite or Media Manager toolbar, click Print.
The Print dialog box opens.
2 If you have more than one printer connected to your computer, select
a printer from the drop-down list.
3 Optional: Click Change Settings to change the printer settings, such
as paper source. For more information about your printer settings, see
the documentation that came with your printer.
4 In the Size drop-down list, select the size of the paper on which you are
printing your project.
5 Set the Orientation to Portrait or Landscape.
6 If you are using Media Manager, select the photos to be printed, by
following these steps:
a On the top right side of the window, click Add Photos .
b Browse to and click the photo file to add.
Tip: To select more than one photo at a time, press and hold Ctrl
while you click the photos.
c Click Add Photos.
C13_UserGuide.book Page 208 Wednesday, June 9, 2010 4:11 PM