40
User
Manual
User
Manual
PID Function Action Values
0x8065 Invert Mapping Centric Tube Set 0= Off / 1= On
0x8066 Invert Mapping Single Tube 1 Set 0= Off / 1= On
0x8067 Invert Mapping Single Tube 2 Set 0= Off / 1= On
0x8068 Invert Mapping Single Tube 3 Set 0= Off / 1= On
0x8069 Invert Mapping Single Tube 4 Set 0= Off / 1= On
0x806A Invert Mapping Swap RGB Panel Set 0= Off / 1= On
0x806B Invert Mapping Swap Single Tubes Set 0= Off / 1= On
0x805C LED Mode Set 0= Illumination / 1= Boost
0x805E Factory Reset Set 0= No / 1= Yes
0x805F User Reset Set 0= No / 1= Yes
0x00C0 Firmware Version Read n.a.
0x8700 Serial Number Read n.a.
0x0400 Device Power on Time Read n.a.
0x8701 Temperature LED RGB Panels & Single Tubes Read n.a.
0x8702 Temperature LED Centric Tube Read n.a.
0x8705 LED on Time RGB Panels Read n.a.
0x8706 LED on Time Centric Tube Read n.a.
0x8707 LED on Time Single Tubes Read n.a.
0x8709 Fan Speed Read n.a.
Sensors
RDM enables various readouts for remote device monitoring. See the table below for sensors and sensor types.
Please note: The RDM controller communicates with the xtures to show only the available sensors for this xture.
The table is subject to change without notice.
Name
Temperature xx°C / xxx°F
Software Version SW-Version
Errors
7.6 Firmware Updating
Here you can nd the Firmware Update Instructions for reading or downloading.
Simply click on the icon or scan the QR code.
Firmware
Update
To Next Page
Loading...