Royal Enfield Super Meteor 650 User Manual

91
Royal Eneld Super Meteor 650
REAR SUSPENSION SETTING
 Rest the motorcycle on
center stand.
 Ensure the tyre pressure
is at recommended
specification.
 Ensure adjuster are clear
of all dirt and debris
before adjusting, if they have dirt or debris please
clean it suitably before adjusting.
 The adjuster is a 5 step adjuster and it is kept at
first notch position.
 Adjust shock preload by rotating the adjuster
clockwise using Allen key to increase the preload.
 Adjust shock preload by rotating anti-clockwise
using Allen key to decrease preload (to make it to
first notch position).
 Make the same adjustments on both sides, uneven
adjustment may lead to discomfort to the rider.
NOTE
 Adjusting the suspension
requires a Allen key. It
is we recommend to
use the Allen key that
is given in your vehicle
tool kit. Extension tube
to be used for leverage
purposes.
Adjuster
 The best spring preload setting is achieved when
it is set for the weight of the rider and that of any
luggage and a passenger.
 We recommend to increase the preload and keep it
at final notch for fully loaded (GVW condition), thus
ensuring an ideal compromise between handling
and stability.
 Do not use any additional tools for this purpose
other than 5 mm Allen key.

Royal Enfield Super Meteor 650 Specifications

General

Displacement	648 cc
Max Power	47 PS @ 7250 rpm
Max Torque	52.3 Nm @ 5650 rpm
Fuel System	Electronic Fuel Injection
Transmission	6-speed constant mesh
Wheelbase	1500 mm
Seat Height	740 mm
Ground Clearance	135 mm
Fuel Capacity	15.7 litres
Kerb Weight	241 kg
Headlamp	LED
Tail Lamp	LED
Engine Type	4-stroke, SOHC, air-oil cooled, parallel twin
Cooling System	Air/Oil cooled
Frame	Tubular Spine Frame
Front Suspension	120 mm travel
Rear Suspension	Twin shocks
Front Brake	320 mm Disc, ABS
Rear Brake	300 mm Disc, ABS
Instrument Console	Analogue and digital