To Next PageTo Next PageWhat to do if my Royal Sovereign RDH-130K Dehumidifier does not start?
If your Royal Sovereign Dehumidifier isn't starting, make sure the dehumidifier's plug is completely pushed into the outlet. Also, check the house fuse/circuit breaker box. The dehumidifier may have reached its preset level, or the bucket might be full. Ensure the water bucket is in the proper position.
Why Royal Sovereign RDH-130K does not dry the air properly?
If your Royal Sovereign Dehumidifier isn't drying the air as expected, consider these points: ensure you've allowed enough time for moisture removal. Check that curtains, blinds, or furniture aren't blocking the front or back of the unit. The humidity control may not be set low enough. Confirm that all doors, windows, and other openings are securely closed. The room temperature might be too low, below 5°C (41°F), or there could be a kerosene heater or something else emitting water vapor in the room.
What to do if my Royal Sovereign Dehumidifier is making a loud noise?
If your Royal Sovereign Dehumidifier is operating loudly, check if the air filter is clogged. Also, make sure the unit is upright and not tilted. The floor surface should be level.
What to do if I see water on the floor near my Royal Sovereign Dehumidifier?
If you find water on the floor near your Royal Sovereign Dehumidifier, the hose to connector or the hose connection may be loose. Alternatively, if you intend to use the bucket to collect water, ensure that the back drain plug is properly installed.
Why does frost appear on the coils of my Royal Sovereign Dehumidifier?
The appearance of frost on the coils of your Royal Sovereign Dehumidifier is normal. The unit has an auto-defrost feature.
General| Brand | Royal Sovereign |
|---|---|
| Model | RDH-130K |
| Type | Dehumidifier |
| Operating Temperature | 41°F - 95°F |
| Voltage | 115V/60Hz |
| Features | Auto Defrost, Continuous Drain Option |
| Capacity | 13 pints |
Important safety warnings regarding electrical hazards, misuse, and environmental factors.
Details electrical requirements, grounding, and advice against extension cords.
Lists and explains error codes and protection codes for troubleshooting.
Explains how to connect a hose for automatic water drainage.
Guides on removing, washing, and re-installing the air filter.
A chart addressing issues like unit not starting or poor drying performance.
Refers to the control panel section for interpreting error codes like ES, AS, P2, EC.
