Why is my Royal Sovereign RDHC-110 Dehumidifier not working?
Your Royal Sovereign Dehumidifier might not be working because it is not plugged in. Make sure to plug in the unit. Also, the room temperature might be too low (below 5°C or 41°F) or too high (above 35°C or 95°F). To protect the dehumidifier, only use it when the ambient temperature is between 5°C and 35°C.
How to fix a loud Royal Sovereign RDHC-110?
If your Royal Sovereign Dehumidifier is operating loudly, it could be due to a couple of reasons. First, check if the machine is on an uneven surface; if so, move it to a flat surface. Second, the filter mesh might be jammed. Clean the filter mesh according to the provided instructions.
What to do if my Royal Sovereign RDHC-110 has reduced capacity?
If your Royal Sovereign Dehumidifier has reduced dehumidifying capacity, it could be due to a jammed filter mesh. Clean the filter mesh. Another possible cause is blocked air-in and/or air-out louvers. Clear any blockage from these louvers.
Why Royal Sovereign RDHC-110 Dehumidifier runs but does not dehumidify?
If your Royal Sovereign Dehumidifier is running but not dehumidifying, it's possible that the humidity set point is only 2% higher than the ambient humidity. Try resetting the humidity to a lower set point.
Follow basic precautions to reduce the risk of fire, electric shock, or injury to persons.
Diagram illustrating the front of the dehumidifier with labeled components.
Diagram illustrating the back of the dehumidifier with labeled components.
Instructions for emptying the water tank when the unit is full.
Instructions for setting up and using the continuous drainage option.
Details on how the unit operates, including full tank status and auto memory function.
Explanation of the defrost function based on temperature and time.
Instructions for storing the unit for extended periods, including cleaning and drying.
General| Brand | Royal Sovereign |
|---|---|
| Model | RDHC-110 |
| Category | Dehumidifier |
| Language | English |
To Next Page
