OPERATING INSTRUCTIONS
A. BELT INSTALLATION AND REMOVAL
NOTE:
THE UNIT MUST NOT BE PLUGGED IN
WHEN INSTALLING OR REMOVING THE BELT.
1.
Remove the plug on the face
of the cleaner.
NOTE:
PLUG MUST BE ON WHEN
ATTACHMENTS ARE NOT
IN USE.
3.
Center and raise the belt with
your left hand as
shown. Using your right hand,
dip the belt lifter in and hook
the belt around the lip of the
belt lifter. Slip the belt onto the
motor shaft
until the belt lifter base meets
the shaft.
To Next Page
Loading...
