B.
BAG REMOVAL AND INSTALLATION
NOTE:
UNPLUG CLEANER WHEN
REMOVING AND INSTALLING BAG.
1.
Grasp metal bag ring as shown.
Twist to the left to remove.
NOTE:
KEEP BAG OPENINGS
POINTED TOWARDS
CEILING TO AVOID
SPILLING DIRT.
2.
Empty bag in trash receptacle
(no inner liners are required).
3.
To
replace bag, place metal
bag ring, with !'top" label
facing
up,
against the motor
housing as shown. Twist to
the right for secure fit.
NOTE:
BE SURE METAL PIN ON
MOTOR HOUSING AND EYELET
ON METAL BAG RING ARE
LOCKED TOGETHER.
To Next Page
Loading...
