RPS sonic HC-CS2000C - Fault Protection and Troubleshooting; Error Code Identification; Troubleshooting: Power Overload (E-01)

Fault protection display and solution
Left-hand EDIT
Right-hand EDIT
Press&Right-ha
nd EDIT
Press&Left-hand
EDIT
Long press EDIT
When the 4 lamps on and alarming, the generator into Protection status.
The screen will show the error code
E-01：Power over loading.
E-02：Frequency out range
E-03：Frequency too low
E-04：Equipment operation fault
E-05
：
Parameters read failed
E-06：loading error
E-01：Power over loading.
How to solve:Reduce the amplitude or reduce the loading(such as reducing the
pressure );
Replace a larger ultrasonic generator.
8
E-02：Frequency out range
How to solve: Cooling the mold;Check mold connection and transducer
Counter Light
Shine
Short press EDIT
Check the front NO.
Check the behind NO.
No meaning
Clear AS 0
Keep and exit.