Need help?Do you have a question about the RS PRO RS-3005P and is the answer not in the manual?
General| Output Voltage | 0-30V |
|---|---|
| Output Current | 0-5A |
| Power Rating | 150W |
| Display Type | LED |
| Number of Outputs | 1 |
| Ripple and Noise | <1 mVrms |
| Line Regulation | <0.01% + 3 mV |
| Cooling | Fan |
| Operating Temperature | 0°C to +40°C |
| Load Regulation | <0.01% + 3mV |
| Protection Features | Short Circuit |
| Storage Temperature | -10°C to +70°C |
| Type | Bench |
| Voltage Regulation | <0.01% + 3mV |
Summarizes key attributes including low noise, fan control, constant voltage/current, digital panel control, display, and protection.
Covers safe operation, impact avoidance, static discharge, and professional disassembly requirements.
Details AC voltage requirements and the necessity of proper grounding to prevent electrical shock.
Specifies suitable indoor conditions and storage parameters such as humidity and temperature ranges.
Guidance on selecting correct fuse ratings, power disconnection before replacement, and fault diagnosis.
Explains how the display indicates voltage level and actual output current values during operation.
Defines the meaning of OCP, C.C, C.V, and LOCK indicators on the front panel.
Details the operation of voltage and current knobs in Mode 1, including resolution changes.
Explains how to start, operate, and close the Over Current Protection (OCP) function.
Describes how to lock and unlock the front panel controls using the LOCK function.
To Next Page
