Need help?Do you have a question about the RS PRO IPS-606D and is the answer not in the manual?
General| Output Voltage | 0-60V |
|---|---|
| Output Current | 0-6A |
| Power Rating | 360W |
| Weight | 5.5 kg |
| Number of Outputs | 1 |
| Line Regulation | ≤ 0.01% + 3mV |
| Load Regulation | ≤ 0.01% + 3mV |
| Protection Features | Over Voltage, Over Current, Over Temperature |
| Efficiency | ≥ 85% |
| Operating Temperature | 0°C to 40°C |
| Display Type | Digital |
| Input Voltage | 220V AC |
| Safety Standards | CE |
Provides general specifications including model, voltage, current, fuse style, and weight.
Details output voltage range, regulation, recovery time, ripple, and temperature coefficient.
Details output current range, regulation, and ripple for constant current mode.
Describes the voltage and current displays, including their accuracy.
Specifies the range and accuracy for the Over Voltage Protection feature.
Lists insulation resistance requirements between terminals and chassis.
Instructions for unpacking the instrument and inspecting for any transportation damage.
Guidance on setting the correct line voltage and replacing fuses when voltage is changed.
Recommendations for operating environment, temperature range, and avoiding interference.
Guidelines for proper installation, ventilation, and potential radio interference issues.
An overview of the power supply's block configuration and its main components.
A list of components associated with each circuit configuration in the system.
Detailed explanation of the voltage and current adjusting circuits with relevant formulas.
A visual representation of the power supply's circuit interconnections and signal flow.
Details and descriptions of all controls and indicators located on the front panel.
Details and descriptions of all connections and switches located on the rear panel.
Essential safety and operational precautions for using the power supply.
A step-by-step guide for setting the desired output current limit.
Explanation of the automatic switching characteristic between CV and CC modes.
Procedure for setting up and operating the power supply in voltage operation mode.
Instructions on how to safely replace the unit's fuse, including warnings.
Steps to convert the power supply for operation on different AC line voltages.
Detailed instructions for performing internal adjustments and calibration.
Proper methods and precautions for cleaning the power supply unit.
To Next Page
