RS 3.5 - Introduction and Guarantee; Features; Treatment of Electrical and Electronic Equipment

ENGLISH ENGLISH
Révision 19 novembre 2014Pag. 5Manuel d’utilisation 57 000 035 / 50600035Révision 19 novembre 2014Pag. 8Manuel d’utilisation 57 000 035 / 50600035
INTRODUCTION & GUARANTEE
FEATURES
• Power supply; 230V-50Hz
• Equipment designed for indoor use.
• Control box with metal anodized finish.
• Transparent polycarbonate tank capacity of 3.5L.
• Heating by means of electric resistance shielded in stainless steel AISI 304
• Temperature regulation by means of bulb thermostat from ambient +5°C to 90°C.
• Equipped with safety thermostat with manual reset, in case of over-heating or
lack of fluid, according to DIN 12877 class 2
• Stainless steel rack for 18 tubes up to Ø20mm.
• Stainless steel support to prevent direct contact of the steam with the control box
Code 57 000 035 / 50600035
Power 1000 W
Capacity of the tray 3.5 L
Overall dimensions of the tray 160 x 150 x 264 mm (W x H x D)
Dimensions with control box & stand 160 x 225 x 264 mm (W x H x D)
Maximum working temperature 90°C
Welcome to the bath for education RS 3.5 user manual. Users should read this manual
carefully, follow the instructions and procedures, and beware of all the cautions when
using this instrument.
When help needed, you can always contact the service department of manufacturer or
your supplier for technical support. Please provide the customer care representative with
the following information: Serial number, description of problem, methods and procedu-
res adopted to resolve the problems and your contact information.
These baths are warranted to be free from defects in materials and workmanship under
normal use and service for a period of 12 months from the date of invoice. The break-
downs caused by inadequate use, handling errors or any other reason not attributable to
a manufacturing defect are excluded from this guarantee.
For claims under the warranty please contact your local dealer. You may also send the
instrument direct to our works, enclosing the invoice copy and giving reasons for the
claim.
TRATAMIENTO DE LOS EQUIPOS ELECTRICOS Y ELECTRONICOS
Directive 2002/96 / EC
This symbol on the nameplate of the equipment or on its pac-
kaging indicates that this product may not be treated as house-
hold waste and therefore must be disposed of at a collect point
of electrical and electronic equipment.
With this action, you. You are helping to better preserve the
environment.
For more detailed information about recycling of this equip-
ment, please contact your city office, your household or nearest
dealer where you purchased your equipment.