Using Mobile App
Loop Recording: Adjust length of each video le (Default: 1 Min)
Video Resolution: Adjust video recording resolution (Default: 1920x1080 30P)
Recording Audio: Enable/Disable Audio recording (Default: On)
HDR: Enable/Disable High Dynamic Range (Default: On)
Exposure Value: Manual adjustment of light exposure (Default: 0)
Motion Detection: Enable/Disable Motion Detection (Default: Off)
G Sensor: Adjust impact sensor’s sensitivity (Default: Low)
Date Stamp: Enable/Disable date stamp on video recording (Default: On)
Camera Date: Adjust Date & Time of camera
Image Rotate: Invert / Rotate video recording (Default: Off)
TV Format: Video output format (North America: NTSC Asia/Europe: PAL)
Format SD Card: Full erasure of all les on your memory card
Reset Camera Settings: Restores all settings to factory presets
Wi-Fi Settings: Change Wi-Fi SSID and Password
App Version: The version of the Mobile App installed
Free Space on Card: Available empty space on memory card
Firmware: Current rmware version on the camera
11
To Next Page
Loading...