21
It’s Under Control
®
CHAPTER 4 | OPERATION
TIME OUT
This button displays a window that allows you to adjust the amount of time
the unit stays awake after the last button press. The time is variable from
1 second to 120 seconds (the default is 10 seconds). Press the arrows to
the left or right of the Time Out setting to adjust the time.
If the backlight is programmed to turn off in idle mode, it is a good idea to
ignore the initial press of the touchscreen that turns the backlight on.
This will prevent unwanted button activations from occurring (since you
may not see what you’re pressing on the touchscreen when the backlight
is off). Select On to ignore the rst press, or Off to accept the rst press.
Press the OK button when nished.
To Next Page
Loading...