21
It’s Under Control
®
BACKLIGHT LEVEL
This button displays a window that allows you to adjust the backlight
brightness and enable/disable the Ambient Light Sensor.
If the light sensor is disabled, there is only one backlight level to adjust.
Press the left arrow or right arrow buttons to adjust. With the light sensor
disabled, the backlight brightness will always stay at the same level
whenever the T2-Cs+ is turned-on. Press the OK button when nished.
If the light sensor is enabled, there are two backlight levels to adjust.
Press the left arrow or right arrow buttons to adjust. Press the OK button
when nished.
With the light sensor enabled, the backlight brightness will automatically
change between the two levels, depending upon the ambient lighting
conditions.
CHAPTER 3 | OPERATION
To Next Page
Loading...
Need help?
General
