RTW PortaMonitor - Page 47

PortaMonitor Switches and menus  Page 7-5
7.5.3. Dwn key
Move cursor down.
7.5.4. Nxt key
Change setting marked by the cursor position or branch to selected
submenu.
7.6. Key functions in mode: Status
After seleceting status display mode status informaton for channel 1 will
be displayed.
Key function are now as follows:
7.6.1. Cha key
Toggle key to display channel A or B status information.
7.6.2. Hex key
Toggle switch plain text versus hexadecimal channel status display for
bytes 0 - 23 of the selected channel.
7.6.3. S1 key
Display status information in plain text.
7.6.4. S2 key
Plain text display of source bytes 6 - 9 and destination bytes 10 - 14.
7.6.5. BIN key
Binary display for bytes 0 - 23 of the selected channel.
7.6.6. AUD key
Bit pattern display of the actual audio data and active bits of the
selected channel.