Need help?Do you have a question about the Ruckus Wireless ICX 7250 and is the answer not in the manual?
General| Model | ICX 7250 |
|---|---|
| Category | Switch |
| Switch Type | Managed |
| Stacking | Yes |
| Jumbo Frames | 9216 bytes |
| VLANs | 4094 |
| AC Power Supply | 100-240V AC |
| Power over Ethernet (PoE) | Yes |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Management | CLI, SNMP |
| Features | sFlow |
| MAC Address Table Size | 32, 000 |
| Ports | 24 or 48 ports |
Connecting to the switch using Telnet or SSH over an IP network.
Connecting to the switch using its serial interface with specific cables.
Steps and settings required to establish a CLI session via terminal emulation.
Basic commands available in user EXEC mode for device status.
Commands for administrative tasks in privileged EXEC mode.
The highest privilege level for making configuration changes on the switch.
Setting up usernames and passwords for secure access to the web interface.
Removing default credentials for enhanced system security.
Link to the specific user guide for the web management interface.
Information on obtaining technical assistance and product resources.
Accessing software updates via the Ruckus Support portal.
Details on the lifetime hardware replacement warranty for Ruckus ICX switches.
To Next Page
