Need help?Do you have a question about the Ruckus Wireless ZoneSwitch 4124 and is the answer not in the manual?
General| Model | ZoneSwitch 4124 |
|---|---|
| Product Type | Layer 2 Switch |
| Uplink Ports | 4 x 1G SFP |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| Power over Ethernet (PoE) | Yes |
| PoE Budget | 370W |
| MAC Address Table Size | 16K |
| VLAN Support | Yes |
| Jumbo Frame Support | Yes |
| Ports | 24 x 10/100/1000 Mbps |
| Power Supply | Internal |
| Dimensions (W x D x H) | 440 x 260 x 44 mm |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Management | CLI |
| Certifications | CE, FCC, UL |
Details Quality of Service and Access List features.
Outlines the security features available on the ZoneSwitch.
Lists Layer 2 functional specifications of the ZoneSwitch.
Details the steps for cabling and powering on the ZoneSwitch.
Ensures a loop-free topology by configuring Spanning Tree Protocol.
Configures priorities for applications, users, or data flows for performance.
Configures Power over Ethernet (PoE) settings for ports.
Covers fundamental CLI commands for mode switching, file transfer, ping, and reboot.
Details CLI commands for managing SNMP on the switch.
Covers CLI commands for system management tasks.
Details CLI commands for managing Layer-2 interface features.
Covers CLI commands for configuring link aggregation.
Details CLI commands for managing MAC addresses.
Covers CLI commands for configuring Multiple Spanning Tree Protocol.
Details CLI commands for IGMP snooping configuration.
Covers CLI commands for VLAN configuration.
Details CLI commands for configuring Quality of Service.
Covers CLI commands for configuring Differentiated Services.
Details CLI commands for configuring Access Control Lists.
Covers CLI commands for configuring 802.1X authentication.
Details CLI commands for RADIUS server configuration.
Covers CLI commands for SNTP configuration.
Details CLI commands for configuring syslog.
Details CLI commands for configuring SSH.
Covers CLI commands for configuring SSL.
Details CLI commands for TACACS+ configuration.
Provides important safety information for personnel, installation, and power supply.
To Next Page
