Ruckus Wireless R610 - User Manual

To Next Page

Published September 2017, Part Number 800-71495-001 Rev C

Unleashed R610 Access Point

Quick Setup Guide

This Quick Setup Guide provides step-by-step

instructions on how to set up your Ruckus Wireless

Unleashed R610 Dual Band 802.11ac Multimedia Wi-Fi

Access Point (AP).

For detailed information on configuration and

administration of your Unleashed R610, refer to the

Unleashed Online Help, available from https://

docs.ruckuswireless.com/unleashed/200.4/index.html.

This Guide in Other Languages

• 请从以下网站获得该指南的简体中文版

https://support.ruckuswireless.com.

• Vous trouverez la version française de ce guide à

l'adresse suivante

https://support.ruckuswireless.com.

• このガイドの⽇本語版は

https://support.ruckuswireless.com

でご覧ください。

• 이 가이드의 한국어 버전은 웹 사이트

(https://support.ruckuswireless.com) 에서 확인하시기 바랍니다 .

• Veja a versão em português (Brasil) deste guia em

https://support.ruckuswireless.com.

• Puede ver la versión en español (América Latina) de

esta guía en

https://support.ruckuswireless.com.

Before You Begin

Before deploying Ruckus Wireless products, please

check for the latest software and the release

documentation.

• User Guides and Release Notes are available at

http://support.ruckuswireless.com/documents.

• Software Upgrades are available at

http://support.ruckuswireless.com/software.

• Open Source information is available at

http://opensource.ruckuswireless.com.

• Software License and Limited Warranty are available

http://support.ruckuswireless.com/warranty.

Package Contents

• R610 Access Point

• One wall-mount anchor kit, including two 1" No. 8

steel panhead Phillips sheet metal screws, one 5mm

M2.5 x 1.06 Torx security screw, and wall-mount

anchors

•One external T-bar bracket (two unassembled parts)

• One unit removal pin

• Regulatory flyer

• Product warranty statement

• Declaration of Conformity, if required

•This Quick Setup Guide

Step 1: Collect Tools and Setup Requirements

• A computer running Windows 7, 8, 10 or Mac OS X

(procedures for other OS’s are similar)

• Two Cat 5e Ethernet cables

• No. 2 Phillips screwdriver and T8 Torx driver for wall

mounting anchor kit

• An AC power adapter (sold separately), or

• An 802.3af or 802.3at -compliant Power over

Ethernet (PoE) switch or PoE injector

• When mounting the R610 to a truss or pole, two

customer-supplied cable ties

Step 2: Connect the AP to Power and Your

Network

Figure 1: Top view

1 After removing your Unleashed AP from its package,

connect it to your network switch or router using an

Ethernet cable.

2 Using an AC adapter (sold separately), connect the

AP 12VDC port to a protected power source.

Alternatively, connect the 10/100/1000

POE In port to

a PoE injector or switch for both power and network

connectivity.

3 Verify that the Power LED on the external enclosure is a

steady green.

Figure 2: Bottom view

STEP 3: CONFIGURE YOUR UNLEASHED NETWORK

Unleashed can be deployed using either a Mobile App, available for both iOS and

Android, or using your PC’s web browser. Refer to the relevant section depending on

which method you prefer to use:

• Step 3a: Setup Using the Unleashed Mobile App

• Step 3b: Setup Using a Web Browser

Step 3a: Setup Using the Unleashed Mobile App

To perform setup using the Unleashed Mobile App, download the iOS or Android app

from the app store.

1 As soon as the Unleashed AP is powered on and connected

to the local network, it boots up and begins broadcasting a

temporary unencrypted WLAN named “Configure.Me-

[xxxxxx]” from both radios.

2 Using your client’s Wi-Fi connection settings, select and

associate to the “Configure.Me-[xxxxxx]” WLAN.

3 Launch the app, and follow the on-screen instructions to

configure your Unleashed network(s).

Figure 3. Unleashed Mobile App for iOS and Android

Need help?

Do you have a question about the Ruckus Wireless R610 and is the answer not in the manual?

Summary

Getting Started and Requirements

Collect Tools and Setup Requirements

Lists essential tools and requirements for setting up the Ruckus Unleashed R610 Access Point.

Connect AP to Power and Network

Instructions for connecting the Unleashed AP to a network switch or router and power source.

Configuration Methods

Setup Using Unleashed Mobile App

Guide for configuring the Unleashed network using the mobile application for iOS and Android.

Setup Using a Web Browser

Steps to configure the Unleashed network via a web browser interface.

Advanced Configuration and Deployment

Customize Your Wireless LANs

Instructions on fine-tuning wireless LAN settings and adding additional SSIDs.

Deploy Additional Unleashed Access Points

Guidance on adding more Unleashed Access Points to an existing network.

Mounting Instructions

Mounting on a Flat Surface

Details on how to mount the Ruckus Unleashed R610 Access Point on a flat surface.

Mounting on a Recessed Drop-Ceiling T-Bar

Instructions for mounting the access point onto a recessed drop-ceiling T-bar.

Mounting on a Truss or Pole

Steps for securing the Ruckus R610 Access Point to a truss or pole.

Summary

Getting Started and Requirements

Collect Tools and Setup Requirements

Lists essential tools and requirements for setting up the Ruckus Unleashed R610 Access Point.

Connect AP to Power and Network

Instructions for connecting the Unleashed AP to a network switch or router and power source.

Configuration Methods

Setup Using Unleashed Mobile App

Guide for configuring the Unleashed network using the mobile application for iOS and Android.

Setup Using a Web Browser

Steps to configure the Unleashed network via a web browser interface.

Advanced Configuration and Deployment

Customize Your Wireless LANs

Instructions on fine-tuning wireless LAN settings and adding additional SSIDs.

Deploy Additional Unleashed Access Points

Guidance on adding more Unleashed Access Points to an existing network.

Mounting Instructions

Mounting on a Flat Surface

Details on how to mount the Ruckus Unleashed R610 Access Point on a flat surface.

Mounting on a Recessed Drop-Ceiling T-Bar

Instructions for mounting the access point onto a recessed drop-ceiling T-bar.

Mounting on a Truss or Pole

Steps for securing the Ruckus R610 Access Point to a truss or pole.

The Ruckus Unleashed R610 Access Point is a dual-band 802.11ac Multimedia Wi-Fi Access Point (AP) designed for robust wireless connectivity. This device functions as a central component in an Unleashed network, providing Wi-Fi coverage and managing other Unleashed member APs.

Function Description:

The R610 AP serves as an Unleashed Master AP, which means it can manage an entire network of Ruckus Unleashed APs without the need for a separate controller. When powered on and connected to a local network, it broadcasts a temporary unencrypted WLAN named "Configure.Me-[xxxxxx]" for initial setup. Users can configure the Unleashed network using either a mobile app (available for iOS and Android) or a web browser. Once configured, the Master AP can fine-tune WLAN settings, create additional WLANs, and automatically provision other Unleashed member APs that are subsequently connected to the same Layer 2 network. The device supports various deployment scenarios, including typical installations where the AP provides Wi-Fi, or gateway installations where it acts as a gateway for both wired and wireless devices. It also supports mesh networking, allowing for flexible network expansion.

Important Technical Specifications:

Wireless Standard: Dual Band 802.11ac
Power Input:
- 12VDC port (requires an AC power adapter, sold separately)
- PoE In port (10/100/1000) supporting 802.3af or 802.3at-compliant Power over Ethernet (PoE) switch or PoE injector.
Network Connectivity: Ethernet cable connection to a network switch or router.
Mounting Options:
- Wall-mount (using an anchor kit with screws and anchors)
- Recessed Drop-Ceiling T-Bar (using an external T-bar bracket)
- Flush Drop-Ceiling T-Bar (using integrated T-bar clips for 15/16 T-bar widths)
- Truss or Pole (using customer-supplied cable ties)
Security: Torx security screw for locking the AP in place on certain mounts.
LED Indicator: Power LED on the external enclosure (steady green indicates proper power).

Usage Features:

Easy Setup: The R610 offers a guided setup process through a mobile app or web browser. The initial setup involves connecting to a temporary Wi-Fi network broadcast by the AP.
Mobile App Configuration: Users can download the Unleashed Mobile App for iOS or Android to perform initial setup and ongoing management. The app provides a user-friendly interface for configuring network settings.
Web Browser Configuration: Alternatively, setup can be done via a web browser by navigating to unleashed.ruckuswireless.com after connecting to the AP's temporary WLAN. This redirects to a Setup Wizard.
Dashboard Overview: After successful login, a dashboard provides an overview of the Ruckus Unleashed network, including WiFi Networks, Clients, Access Points, and System Name.
WLAN Customization: The device allows for fine-tuning of existing WLAN settings and creation of new WLANs from the dashboard. This includes editing configurations and deploying changes across the network.
Scalability: Additional Unleashed member APs can be easily deployed by simply connecting them to the same Layer 2 network and providing power; they automatically discover the Master AP and join the network without additional configuration steps.
Flexible Mounting: The R610 supports multiple mounting methods, making it adaptable to various installation environments such as walls, different types of ceiling T-bars, or even trusses and poles.

Maintenance Features:

Software Upgrades: Users can access software upgrades from the Ruckus Wireless support website.
Documentation Access: User Guides and Release Notes are available online for detailed information on configuration and administration.
Troubleshooting: The device includes basic troubleshooting options accessible through the mobile app or web interface, such as checking mesh status, speedflex, and ping.
Unit Removal Pin: A dedicated unit removal pin is provided to unlock the mounting bracket from the AP enclosure, facilitating easy removal for maintenance or relocation.
Open Source Information: Information regarding open source components is available on the Ruckus Wireless website.
Warranty Information: Details on software license and limited warranty are provided on the Ruckus Wireless website.