About this Guide
This SmartCell Gateway™ (SCG) 200 HLR Interface Reference Guide describes the
interface between the SCG and multiple Home Location Registers (HLRs) in terms of
managing a SCG for authentication/authorization and for unsolicited authorization
changes. This guide lists all the interface messages used between the SCG and the
HLR.
This guide is written for service operators and system administrators who are responsible
for managing, configuring, and troubleshooting Ruckus Wireless devices. Consequently,
it assumes a basic working knowledge of local area networks, wireless networking, and
wireless devices.
NOTE If release notes are shipped with your product and the information there differs
from the information in this guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat Reader Portable
Document Format (PDF) or HTML on the Ruckus Wireless Support Web site at
https://support.ruckuswireless.com/contact-us.
Document Conventions
Table 1: Text conventions on page 5 and Table 2: Notice conventions on page 5 list
the text and notice conventions that are used throughout this guide.
Table 1: Text conventions
ExampleDescriptionConvention
[Device Name] >Represents information as it
appears on screen
message phrase
[Device Name] >
set ipaddr 10.0.0.12
Represents information that
you enter
user input
Click Start > All ProgramsKeyboard keys, software
buttons, and field names
user interface controls
Click Advanced Settings.
The Advanced Settings
page appears.
screen or page names
5
Ruckus Wireless™ SmartCell Gateway™ 200 HLR Interface Reference Guide for SmartZone™ 3.5.1
5
To Next Page
Loading...
Need help?
General
