To Next PageTo Next Page
Need help?Do you have a question about the Ruckus Wireless ZoneFlex 2942 and is the answer not in the manual?
General| Model | ZoneFlex 2942 |
|---|---|
| Wireless Standards | 802.11a/b/g/n |
| Maximum Data Rate | 300 Mbps |
| MIMO Technology | 2x2 MIMO |
| Antenna Type | Internal |
| Frequency Bands | 2.4 GHz |
| Power over Ethernet (PoE) | 802.3af |
| Weight | 227 g (0.5 lbs) |
| Antenna Gain | 3 dBi (2.4 GHz), 4 dBi (5 GHz) |
Guidelines for determining optimal Access Point placement for coverage and performance.
Explains how location and orientation affect wireless network performance.
Steps for initial configuration before deploying the Access Point.
Procedures to confirm the Access Point is functioning correctly after setup.
Instructions for placing and connecting the Access Point to its permanent location.
Instructions for accessing and logging into the AP's web-based management interface.
Defines how the Access Point connects to the local network and the Internet.
Covers common and specific settings for WLAN configuration.
Instructions to change the default administrator username and password.
Procedures for checking and applying software updates to the AP.
Steps to restore the AP to its original factory default settings.
