Need help?Do you have a question about the Ruckus Wireless ZoneFlex R310 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 867 Mbit/s |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | WPA-PSK, WPA-TKIP, WPA2-AES |
| Antenna features | Integrated antenna |
| Output current | 1 A |
| Output voltage | 12 V |
| Power consumption (max) | 9 W |
| Power consumption (typical) | 7.1 W |
| Placement | Table, Wall |
| Product color | White |
| Cable lock slot type | Kensington |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
Weight and Dimensions| Depth | 138 mm |
|---|---|
| Width | 135 mm |
| Height | 33 mm |
| Weight | 220 g |
Explains how APs discover controllers and operate in standalone mode.
Guide to configure Device, Internet, and Wireless settings for standalone or managed operation.
Procedure to change the default admin username and password for enhanced security.
Configures management access via HTTP, Telnet, SSH, and FlexMaster.
Configures the AP to register and communicate with the FlexMaster server.
Guides on viewing AP logs and configuring automatic log delivery to a syslog server.
Instructions for checking and applying firmware updates to the AP via the web interface.
Restores the AP to its original factory settings, erasing all active configurations.
To Next Page
